Free shipping on orders over $299 (US) & $399 (Europe, Asia, Canada, Mexico). Heavy/large items excluded. Local pickup not available in Burbank temporarily.
Basic Kit for BMPCC 6K Pro/G2
Basic Kit for BMPCC 6K Pro/G2
Basic Kit for BMPCC 6K Pro/G2
Basic Kit for BMPCC 6K Pro/G2
Basic Kit for BMPCC 6K Pro/G2
Basic Kit for BMPCC 6K Pro/G2

Basic Kit for BMPCC 6K Pro/G2

Free shipping on US orders over $299 and on EU, Asia, Canada, and Mexico orders over $399 (11/24-11/30 only)
(Offer excludes AK/HI. Some items are excluded due to weight)

$225.00

SKU: N/A Category:
UPC


All-New Tilta Camera Cage for BMPCC 6K Pro w/ EVF Support
Full Camera Cage for BMPCC 6K Pro/G2

Detachable Design

Lightweight, Compact, Durable.

bmpcc 6k pro

Features

Full Camera Cage for BMPCC 6K Pro/G2

Compatibility

Compatible with the original battery grip from Blackmagic Design. Under the half cage setup, remove the bottom plate and secure it to the bottom of the battery grip.

Full Camera Cage for BMPCC 6K Pro/G2

15mm Rod Holder

With the original battery grip mounted, the 15mm rod holder and 15mm rods can be installed to mount a follow focus, lens support, etc.

Full Camera Cage for BMPCC 6K Pro/G2

Viewfinder Extension

Newly patented viewfinder extension. Provides a fully immersive operating experience.

Full Camera Cage for BMPCC 6K Pro/G2

Adjustable for viewing angle

Find your best viewing angle. Easily adjustable for different user’s operating needs. Provides the best view for operating.

Full Camera Cage for BMPCC 6K Pro/G2

Easy Installation

Extremely adjustable. The connecting joint supports 360° adjustment. The support arm can be adjusted both horizontally and vertically.

Full Camera Cage for BMPCC 6K Pro/G2

Top plate

The top plate has 3 built-in cold shoe mounts and 1/4”-20 screw holes for mounting various accessories.

Full Camera Cage for BMPCC 6K Pro/G2

Easy mounting

Supports the new Tilta M.2 SSD case. Easily mounts onto any 1/4”-20 screw holes on the camera cage.

Full Camera Cage for BMPCC 6K Pro/G2

Quick Release SSD Drive Holder

Compatible with T5 and T7 SSD drives.

Full Camera Cage for BMPCC 6K Pro/G2

Side Arm

Includes ARRI Compatible Rosette, 1/4”-20 Screw Holes with Locating Points, and NATO Rail.

Full Camera Cage for BMPCC 6K Pro/G2

90° Angled Cable Adapter

90° angled cable adapter for more secured mounting. Provides more efficient operating and data protection.

Full Camera Cage for BMPCC 6K Pro/G2

Tactical Combat Design

With the NATO rail adapter mounted, it can be installed to any 1/4”-20 screw hole.

Full Camera Cage for BMPCC 6K Pro/G2

Reserved space

Reserved space for securing an M.2 SSD case.

Full Camera Cage for BMPCC 6K Pro/G2

Compatible with original battery grip

From Blackmagic Design.

Full Camera Cage for BMPCC 6K Pro/G2
Full Camera Cage for BMPCC 6K Pro/G2
bmpcc 6k pro basic kit

Description

  • [PROTECTIVE ARMOR] for BMPCC 6K Pro/G2 Minimizes Wear and Tear Over Time
  • [MOUNT ACCESSORIES] via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 1/4"-20 Threads with Locating Pins
  • [QUICK RELEASE TOP HANDLE] Provides More Flexibility When Operating and Handling
  • [RECORD TO SSD] via the Samsung T5 Drive Holder and Mountable USB-C Cable
  • [15MM ROD SUPPORT] When Using Battery Grip Extension Bracket

Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro and 6K G2.

This Basic Kit for the BMPCC6K Pro/G2 provides protective armor for the camera body and includes some relevant accessories to improve functionality.

The Full Cage offers several 1/4”-20 threads with locating pins, cold shoe receivers, a NATO Rail for Type IV and VI Side Handles, as well as Rod Attachment Ports for our Single Rod Holders.

It also features ARRI compatible rosettes, which are specifically designed for our Adjustable Top Handle Plus for more flexible operating and handling.

The right side arm module can be removed to turn this Full Cage into a Half Cage.

This offers more flexibility in situations where lighter builds are required such as when using a gimbal.

The Bottom Plate provides several ¼”-20 mounting points for attaching your camera to various quick release plates and is compatible with the ARCA Receiver of the RS2 Mounting Plate.

When using the Half Cage, the bottom plate can be extended to support the Black Magic Design Battery Grip.

An included 15mm rod mount can be installed to support 15mm rods in front of the camera body when using the Battery Grip in the Half Cage setup.

The included Quick Release Top Handle can be attached to the top of the cage via a cold shoe receiver and ¼”-20 screw.

This provides an extremely secure connection to comfortably handle and operate your camera system.

The Top Handle features additional ¼”-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs.

The SSD Drive Holder attaches directly to the Cage via a 1/4″-20 screw and locating pin.

It can then clamp onto a Samsung T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card.

The included USB-C cable is able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port.

This creates an extremely secure connection between your camera and drive.

The 90 Degree HDMI Adapter mounts to the cage near the camera’s HDMI port and offers a secure connection that limits wear on the port itself.

NOTE: If you receive a kit with a T7 Holder, please contact us at: [email protected]

1:Full Camera Cage for BMPCC 6K Pro *1
2:Tiltaing Quick Release Handle*1
3:Tiltaing SSD Drive Holder for T5 *1
4:15mm Rod Holder for BMPCC 6K Pro *1
5:HDMI 90-Degree Adapter for BMPCC 4K/6K(TA-T01-HDA-90)*1
6:90-Degree USB-C Cable (30cm) for BMPCC 4K/6K(CB-USBC-30)*1
7:Accessory Mounting Bracket for BMPCC 6K Pro Battery Grip *1

Dimensions: 13 x 6.5 x 3.5 inches

Weight: 1.8 lbs

Net Weight: 0.4 lbs

Materials: Aluminum alloy, stainless steel

Color: Black, Tactical Gray

Customer Reviews
4.1 Based on 20 Reviews
5 ★
45% 
9
4 ★
20% 
4
3 ★
35% 
7
2 ★
0% 
0
1 ★
0% 
0
100reviewers would recommend this product Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
MB
17 October 2022
MARTI B.
US US
I recommend this product

Great Cage!

Functional and sleek design. There's a ton of mounting points and I love the included right angle cords for USB-C and HDMI connection.

  • Product Quality Needs WorkGoodExcellent
  • Price / Value ExpensiveOKGreat
  • What kind of content do you create? Documentary Films
  • What Camera System do you use this with? Blackmagic Design
JA
26 January 2022
Juan A.
Mexico City, Mexico City, Mexico

Almost perfecr

I have the cage for the pockets 4k and i think this one of the pocket 6k pro is better in many ways except in the bottom part. I like to use my tripod baseplate with two screws so the camera holds in a stronger way and it cant be done with the 6k pro cage. Also i dont use the battery grip so I have some extra pieces that i really dont need, but buying everything individually was more expensive. And for last i woud love to have a L bracket for audio minixlr and mini jack if possible so my camera ports are protected.

EM
02 November 2021
Emmanuel M.

It just makes sense

The best cage you can get honestly. I just wish the holes on the bottom where more like the design on the BMPCC 4K/6K. Overall great fit to the body and with arri mounts it makes the cage really versatile.

JT
05 October 2021
Joseph T.
High Point, North Carolina, United States

Great - But with one major, simple flaw that caused a return. Do these guys even use cameras?

Tilta came out of the gate, being the first to offer cage support for the battery grip. However, be aware that on the bottom there is only ONE 1/4" thread that is in the center of the lens. Most people who get a rig will build it out enough where the weight will rotate the camera after normal use. It didn't take much for the cam to swing left and right. Other than that, the build quality and versality is pretty great. Now, being close to end of 21, it didn't take long for smallrig to not only catch up with a full battery grip cage offering. Additionally, they are now pre-releasing a cage that secures around just the camera, and allows you to pop on and off the battery grip (SM3517). Returning my tilta for this one.

LP
04 October 2021
Lil p.
Oak Park, California, United States

Half Cage with battery grip

I’m disappointed that it’s only a half cage when using the battery pack. However, it’s a good product.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this. View our Privacy Policy for more information.

Close